NorthEastDragway.Net http://northeastdragway.net/forum/
No More Chevy http://northeastdragway.net/forum/viewtopic.php?f=4&t=3194	Page 1 of 1

---

Author:	383Stroker [ Sat Oct 27, 2012 3:05 pm ]
Post subject:	No More Chevy
Well still here with different vehicle and motor setup was gonna build an s10 but decided to go with a 88 mustang fox i could pass up this deal paid 1300 for this car and motor list of mods so far 1988 mustang fox with lake wood drag shocks,strange adjustable front,jegs electric fuel pump,10 gal fuel cell,fuel pressure regulator,sub frame connectors,3.73 rear end,msd 6a box,lift off cowl hood motor setup is a 302 converted back to a carb setup,ford racing b cam,750 carb,longtubes,msd billet dizzy,unknown single plane intake mani, heres a pictures

---

Author:	LittleRiver [ Wed Jul 31, 2013 6:27 am ]
Post subject:	Re: No More Chevy
Don't throw that 383 away just yet. The "Heart beat of America" had a "Better Idea" years ago and it paid off for me. Don't take much to drop that chevy in that ford and Ride. Bought a old pro stock Pinto had a lenco 5 and a 351C in it when I got it. 6.00s Fun pulling gears with a 5.56 rear in the 1/8 for a while but won't getting in the money. Never knew what you were going to run. this was early 1980s. First Chevy motor was a 383, and we dropped the gears to 4.56. PG Slowed the car up some but whole lot closer to the dial in but the motor was almost stock. 6.50s 10.5 pistons, little clean up on stock heads and a crane cam and we used the smaller 400 rods. Ended up with a pro, Alu head 377 in the 5.80s Car weighed 1850 pounds wet. See you already got a pit crew scooping things out inside the new ride, and its up to you which way you want to fly, but if you already got you foot in the door with a motor, why start over. Just my thoughts.

---

Author:	rtj301 [ Mon Jul 29, 2019 9:10 am ]
Post subject:	Re: No More Chevy
Where is it now?

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/