NorthEastDragway.Net
http://northeastdragway.net/forum/

489 CID BBC 3 Stage Dry Sump
http://northeastdragway.net/forum/viewtopic.php?f=3&t=5217
Page 1 of 1

Author:  Dragracerwb [ Tue Feb 04, 2020 4:07 pm ]
Post subject:  489 CID BBC 3 Stage Dry Sump

489 CID BBC Mark IV .030 over 4 bolt main. Wiesco 10.5 forged pistons w moly rings. 4340 4.250 stroke Crank, +.250 I Beam Scat rods. 320 cfm ported aluminum heads with all new valves, severe duty 11/32 in valves, 2.25 in 1.88 + .100 ex, Felpro Perma tork gaskets, Howards solid roller springs w/ Titanium retainers, lash caps, Howards push rods and roller lifters with stainless steel shaft rocker system 1.7 ratio. Crane R-274 mech roller cam and Billet timing set, aluminum timing cover. Holley Pro Dominator 2X 4- 4500 intake (ported). Weaver 3 stage dry sump plumed with lines, pump, and remote filter. PC balancer. Internal balance. (Never run)

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/