NorthEastDragway.Net
http://northeastdragway.net/forum/

605 CID 3 Stage Dry sump engine
http://northeastdragway.net/forum/viewtopic.php?f=3&t=5216
Page 1 of 1

Author:  Dragracerwb [ Tue Feb 04, 2020 4:04 pm ]
Post subject:  605 CID 3 Stage Dry sump engine

605 CID Big Block Chevy. Bow Tie 10.200 tall deck 4 bolt block, Fresh plate hone, New 4340 4.75 demotor crank internal balanced, new 6.70 Speed master H-beam rods, Venolia 13.5 forged pistons, Brodix-3 heads ported and flowed by Heads by Rick, 2.35 Severe Duty 11/32 intakes, 1.90 Severe duty 11/32 exhaust valves, K-1000H springs, titanium retainers, Jesel rocker system 1.65 ratio, Jesel belt drive, 7in fluid damper, Crane R 284 Solid roller, howards roller lifters, howards .080 push rods, Hamburgers 3 stage oil pan, weaver 3 stage dry sump oil pump, plumed with system one oil filter. New Holley 4500 Sniper 2x4 sheet metal intake. Fresh rebuild with Malhe moly rings, King rod and main bearings. Moroso fabricated sheet metal valve covers. New gaskets through out. Note weld repair on left head and drill stop at bottom of #5 cylinder. Block has ¾ hardblok fill. Both Block and head pressure checked good. Asking $17,500. Shipping at buyers expense. Local pick up preferred.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/