NorthEastDragway.Net
http://northeastdragway.net/forum/

86 Tbird Turbo Coupe Roller
http://northeastdragway.net/forum/viewtopic.php?f=3&t=5157
Page 1 of 1

Author:  Gydyup [ Tue Feb 05, 2019 10:57 am ]
Post subject:  86 Tbird Turbo Coupe Roller

Attachment:
New Bird 2.jpg
New Bird 2.jpg [ 244.94 KiB | Viewed 3262 times ]
Pic is day we brought it home, much has been done since.

Selling my Turbo Coupe Bracket project. I was building a second car, this one a bracket car for my daughters. But we are deep into competitive skeet shooting and we don't have time for two cars and and shooting. This car needs to be finished.
Right now, its a great solid body, one rust spot on rear window sill, stripped of interior, wiring. Retains headliner, door panels, glass, and power windows, head and tail lights with harnesses though. Dash shell is with it, but stripped of gauges etc. AC/HEAT, its all stripped.
Completed through floor frame rails, has race seats mounted, three pedal set up with BBK quadrant for manual, AJE tubed front end, Manual Rack installed - retained factory column and tilt steering wheel, Lakewood 90/10 struts, coil over conversion complete with Moroso 12 in 175 lb springs, 5 lug conversion up front, Maximum Motorsports Camb/Caster kit, Strange Manual MC kit installed.

Has 15X3 Weld drag lights and tires up front, and 15X12 (4in BS) Weld drag lights with decent 275 15 Drag Radials for rear.

I was getting ready to either back half or mini tub the car with a 9 inch. I have the housing and 4:56 Center Section, but may not let it go.

As it sits, its rolling on the orig 7.7 rear and stock alum wheels tires and the Weld draglights up front.
Be a great candidate for a Fox 8.8 rear. put a motor in it and race.

Lots of time and money invested, $2000,00. May consider trade for 9 inch cntr section 31 splines/spool and cash on your end, or camper with cash on my end,.

As it warms up, I may continue back halfing this thing to sell as a complete roller, price will go up.

You can txt me at 757 394 6410 for info and pics

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/