Author |
Message |
boodieman
|
Posted: Sat Jan 16, 2016 2:02 pm |
|
Joined: Tue Jun 28, 2011 9:49 am Posts: 376
|
Sbc 384 Alum. Procomp 217cc heads 2.02/1.60 valves 7/16 studs, alum rockers 12.5.1 SRP pistons Bullet solid roller camshaft Super Victor intake with HVH alum 4 hole spacer 5.7 I beam rods Scat 4340 crank externally ballanced 7 quart oil pan aftermarket ballancer and flywheel Motor in good air has been 6.40 @ 106.24 with a 1.38 60ft @ 3156 lbs @ NED in my Camaro Built by Tony Griekspoor of Riverside Performance this was his spare motor that ran 6.20s in his S-10 , I have all paperwork that was given to me when I purchased motor motor has 320 passes does not smoke or burn oil has 65 lbs of oil pressure I would check vavle springs and lifters due to the number of passes motor has 2 WINS 1 RUNNER UP @ NED $3800 OBO. Contact Leon @ 1-252-722-1614 I do not TEXT ! Motor is still in car so you can hear run, but will be changed soon.
|
|
|
|
|
boodieman
|
Posted: Wed May 18, 2016 4:06 pm |
|
Joined: Tue Jun 28, 2011 9:49 am Posts: 376
|
Motor is out of car and ready to go. New price $3400 !
|
|
|
|
|
|